NSN 5990-00-351-5479 · NIIN 003515479 · FSC 5990
NO DASHES 5990003515479
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
51 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRJX | SHAFT TAPERED END MINOR DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1140 AND INCHES MAXIMUM 0.1160 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 46.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3113 AND INCHES MAXIMUM 1.3120 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4975 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.0300 AND INCHES MAXIMUM 1.3300 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ALNF | SHAFT HOLE DIAMETER | FRONT SHAFT INCHES MINIMUM 0.0160 AND INCHES MAXIMUM 0.0170 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 23.00 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQZS | SHAFT SLOT DEPTH | REAR SHAFT INCHES NOMINAL 0.0300 |
| CRSJ | SHAFT TYPE | REAR SHAFT ROUND, SLOTTED |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 274.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 7.70 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.3090 AND INCHES MAXIMUM 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0680 AND INCHES MAXIMUM 0.0880 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0020 AND INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0350 AND INCHES MAXIMUM 0.0450 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHYF | SECURING HOLE QUANTITY | 4 |
| CRHN | SHAFT SLOT WIDTH | REAR SHAFT INCHES NOMINAL 0.0200 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES MAXIMUM 1.0 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, TAPERED, HOLLOWED |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 31.00 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 5.70 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 3.500 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 7000.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 3500.0 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 40.00 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1370 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1220 AND INCHES MAXIMUM 0.1230 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES NOMINAL 0.0980 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.2030 AND INCHES MAXIMUM 0.2330 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MAXIMUM 0.0200 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 15.50 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.3 |
| AJSL | BODY SIZE | 14 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CRH-15-RBQ-1/F045 | 4H618 |
| 2G4009-8 | 99932 |
| 4006-01 | 99932 |
| CRH-15-RBQ-1/F045 | 99932 |
| 45-4009-08 | 99932 |