NSN 5990-00-366-0112 · NIIN 003660112 · FSC 5990
NO DASHES 5990003660112
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -2.0 TO 2.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6240 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.8350 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0670 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1243 AND INCHES MAXIMUM 0.1247 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4850 AND INCHES MAXIMUM 0.7700 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 30.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 580.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1620.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 168.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLATTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | NOMINAL 1400.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 40.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJTY | ZCO RESISTANCE IN OHMS | NOMINAL 370.00 |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 235.00 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 1.010 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 2.0590 AND INCHES MAXIMUM 2.0650 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 608.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 411.00 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.1060 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AAQL | BODY STYLE | |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 235.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9990 AND INCHES MAXIMUM 1.0000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S315-7234P001 | 3B150 |
| S315-7234P001 | 49956 |
| S315-7234P001 | 54X10 |
| BQC-11-DF-9/B709 | 99932 |