NSN 5990-00-373-9787 · NIIN 003739787 · FSC 5990
NO DASHES 5990003739787
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 0.02 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 25.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 37.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3700 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 7.000 AND INPUT TO OUTPUT MAXIMUM 10.000 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 39.00 AND MAXIMUM 54.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 100.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.03 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4997 AND INCHES MAXIMUM 0.5000 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 260.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLATTED |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 540.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.04 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 2200.000 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.0750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7810 |
| AAQL | BODY STYLE | |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6910 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SGH-18-D-4/P012 | 4H618 |
| 578R817H01 | 97942 |
| 584R341G01 | 97942 |
| 582R556G01 | 97942 |
| SGH-18-D-4/P012 | 99932 |