NSN 5990-00-406-1842 · NIIN 004061842 · FSC 5990
NO DASHES 5990004061842
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 310.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 190.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 190.00 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | MAXIMUM 0.2 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 1.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 12.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1920 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5310 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 15.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 5.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.6250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.800 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 20.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 390.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 305.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 480.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2000.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 240.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 2.9020 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3300.00 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |