NSN 5990-00-441-7974 · NIIN 004417974 · FSC 5990
NO DASHES 5990004417974
In Stock
SYNCHRO,RECEIVER-TRANSMITTER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHCG | MAXIMUM TEMP RISE | CELSIUS 35.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3270 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7720 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 80.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 23 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.783 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 2.8 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MAXIMUM 920.00 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 10.00 AND MAXIMUM 18.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 20.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 50.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 500.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.030 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/23-001 | 81349 |
| 15TRX6A | 81349 |
| MIL-S-20708/23 | 81349 |
| M20708/23-01A | 81349 |
| M20708/23-01A | 0U583 |
| SAE-AS20708/23 | 0U583 |