NSN 5990-00-444-6987 · NIIN 004446987 · FSC 5990
NO DASHES 5990004446987
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 32.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.0995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3680 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.8010 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.2240 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0615 AND INCHES MAXIMUM 1.0620 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 77.30 AND MAXIMUM 83.50 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 585.00 AND MAXIMUM 700.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 22.00 AND MAXIMUM 32.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 4350.00 AND MAXIMUM 5700.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1120 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 18.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 20.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJSL | BODY SIZE | 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708-1-002 | 80223 |
| M20708/1-02E | 81343 |
| AS20708/1 | 81343 |
| M20708/1D-002 | 81349 |
| 11CT4E | 81349 |
| M20708/1-02E | 81349 |
| M20708-1-002 | 81349 |
| MILC20708-1 | 81349 |
| AS20708/1 | 0U583 |
| M20708/1-02E | 0U583 |
| SAE-AS20708/1 | 0U583 |