NSN 5990-00-457-8940 · NIIN 004578940 · FSC 5990
NO DASHES 5990004578940
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1470 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8350 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| BFHF | DISTANCE FROM SHAFT HOLE CENTER TO END | SINGLE SHAFT INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.1000 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND W/THROUGH HOLE |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0400 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10189018 | 2X130 |
| 10189018 | 82686 |
| ESH-11-CJS-5/B548 | 99932 |
| ESH-11-CJS-5/F211 | 99932 |
| 10056488 | A486G |
| 10189018 | 18876 |