NSN 5990-00-469-4847 · NIIN 004694847 · FSC 5990
NO DASHES 5990004694847
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 1258.00 AND MAXIMUM 1784.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 7.62 AND MAXIMUM 11.62 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 743.00 AND MAXIMUM 1093.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 26.1 AND MILLIAMPERES MAXIMUM 31.9 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.8 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 100.0 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5470 AND INCHES MAXIMUM 0.5770 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 276.00 AND MAXIMUM 484.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.0995 AND ROTOR TO STATOR MAXIMUM 0.1057 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 3465.00 AND MAXIMUM 4245.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 618.00 AND MAXIMUM 770.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 8.80 AND MAXIMUM 11.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 13.200 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7880 AND INCHES MAXIMUM 1.8180 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 28.60 AND MAXIMUM 41.40 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -14.0 TO 14.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CM41014105 | 88818 |
| 8175W12P006 | 97424 |
| 8175W12P002 | 97424 |
| HGC-8-SN9/L887 | 99932 |
| 8175W12P002 | 99932 |
| CM41014126 | 05088 |