NSN 5990-00-481-5614 · NIIN 004815614 · FSC 5990
NO DASHES 5990004815614
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MINIMUM 0.3760 AND INCHES MAXIMUM 0.4000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| AAQL | BODY STYLE | |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 80.70 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 385.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 21.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 30.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.5520 AND INCHES MAXIMUM 0.5760 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 3340.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 79.20 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | BOTH SHAFTS INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 577.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 60.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.200 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7650 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES NOMINAL 0.0250 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.7030 AND INCHES MAXIMUM 2.7270 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSL | BODY SIZE | 11 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RS901-3J | 88818 |