NSN 5990-00-484-1517 · NIIN 004841517 · FSC 5990
NO DASHES 5990004841517
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5950 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 866.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.5490 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 47.00 AND MAXIMUM 53.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.160 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.240 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4100 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 7.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 90.00 AND MAXIMUM 112.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 84.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 11.00 AND MAXIMUM 15.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7090 AND INCHES MAXIMUM 0.7290 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4450 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2380 AND INCHES MAXIMUM 0.2405 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 25.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VTDX23-38-4C3 | 10112 |