NSN 5990-00-485-7600 · NIIN 004857600 · FSC 5990
NO DASHES 5990004857600
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3640 AND INCHES MAXIMUM 0.3880 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 9.00 AND MAXIMUM 15.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 7.000 AND INPUT TO OUTPUT MAXIMUM 10.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0700 AND INCHES MAXIMUM 0.0750 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 153.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 700.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 170.00 AND MAXIMUM 215.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 77.50 AND MAXIMUM 80.50 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 11.00 AND MAXIMUM 15.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.7530 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.04 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.0380 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.6680 AND INCHES MAXIMUM 1.6980 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0600 AND INCHES MAXIMUM 1.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1243 AND INCHES MAXIMUM 0.1248 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0700 AND INCHES MAXIMUM 0.0760 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75002016201 | 89944 |
| 11CX310G21E | 06989 |