NSN 5990-00-501-2008 · NIIN 005012008 · FSC 5990
NO DASHES 5990005012008
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.5180 |
| CQTM | TERMINAL LOCATION | REAR |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1247 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 0.5 AND MAXIMUM 16.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 40000.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.955 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 8 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8070 AND INCHES MAXIMUM 0.8120 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1900 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 2000.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |