NSN 5990-00-503-0387 · NIIN 005030387 · FSC 5990
NO DASHES 5990005030387
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | REAR |
| AKAN | SHAFT THREAD CLASS | 3A |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.6170 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0020 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 7.164 AND INPUT TO OUTPUT MAXIMUM 7.236 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 0.02 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0060 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9940 AND INCHES MAXIMUM 1.9950 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9940 AND INCHES MAXIMUM 1.9950 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5990 AND INCHES MAXIMUM 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MINIMUM 0.1700 AND INCHES MAXIMUM 0.1720 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.7430 AND INCHES MAXIMUM 4.8550 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2480 AND INCHES MAXIMUM 0.2500 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3100 AND INCHES MAXIMUM 0.3400 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.240 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| MATT | MATERIAL | BODY ALUMINUM |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1233385 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.4190 AND INCHES MAXIMUM 0.4200 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2400 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6100 AND INCHES MAXIMUM 0.6300 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 8.0 AND MAXIMUM 50.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 40.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 200.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 570.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 79.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 260.30 AND MAXIMUM 287.70 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 72.96 AND MAXIMUM 80.43 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9840 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 05G00099-0288 | 01425 |
| PL01G004094-000 | 01425 |
| PL01G004094-000 | 00U45 |
| 05G00099-0288 | 00U45 |
| PL01G004094-000PC1 | 00U45 |
| 1233385 | 10001 |