NSN 5990-00-503-2911 · NIIN 005032911 · FSC 5990
NO DASHES 5990005032911
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0400 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5310 |
| AJSL | BODY SIZE | 15 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1247 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0600 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 1.000 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 3.500 AND INPUT TO OUTPUT MAXIMUM 5.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.955 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 8 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4280 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 1.4420 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 16.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 120.00 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 60.00 |
| AAQL | BODY STYLE | |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6660 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 15-4042-07 | 58880 |
| R587-1A | 88818 |
| IR15N4-313 | 08719 |
| VRH15-4L8 | 10112 |
Supersedes
This item replaces cancelled NIIN 007167801. An older drawing citing one of those numbers resolves here.