NSN 5990-00-518-0672 · NIIN 005180672 · FSC 5990
NO DASHES 5990005180672
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 165.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 5 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.2180 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 20.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 4.00 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 81.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 37.50 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4310 AND INCHES MAXIMUM 0.4370 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 80.70 |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.700 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7810 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| CQRG | BODY MATERIAL | ALUMINUM |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 218.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 800.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006864183. An older drawing citing one of those numbers resolves here.