NSN 5990-00-518-0684 · NIIN 005180684 · FSC 5990
NO DASHES 5990005180684
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 7.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.400 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 600.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 3.3900 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.3260 AND INCHES MAXIMUM 0.3300 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 5B |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0300 AND INCHES MAXIMUM 0.0400 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0600 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.280 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES MINIMUM 0.1550 AND INCHES MAXIMUM 0.1560 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.2500 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0080 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.4680 AND INCHES MAXIMUM 0.4720 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0005 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2498 AND INCHES MAXIMUM 0.2500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.8200 AND INCHES MAXIMUM 0.8400 |
| AJSL | BODY SIZE | 34 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.7710 AND INCHES MAXIMUM 1.7715 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9837 AND INCHES MAXIMUM 0.9842 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 2.1800 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.7900 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3020 AND INCHES MAXIMUM 0.3220 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 3A |
| CQRG | BODY MATERIAL | ALUMINUM ALLOY |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 561788PC1 | 10001 |
| 561788-1REVE | 10001 |
| 709253 | 10001 |