NSN 5990-00-529-8767 · NIIN 005298767 · FSC 5990
NO DASHES 5990005298767
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | REAR |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 0.4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0430 AND INCHES MAXIMUM 0.0470 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 0.8 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 85.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 16.000 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 94.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1385.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 540.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1242 AND INCHES MAXIMUM 0.1247 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4220 AND INCHES MAXIMUM 0.4520 |
| AHYF | SECURING HOLE QUANTITY | 3 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 74.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7350 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1975.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 675.00 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1300.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0750 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.060 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.5910 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 32.5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 532715-4 | 96214 |
| 8BCT304A13-10 | 06989 |