NSN 5990-00-538-1124 · NIIN 005381124 · FSC 5990
NO DASHES 5990005381124
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTT | STATOR DC RESISTANCE IN OHMS | MAXIMUM 354.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0010 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7630 AND INCHES MAXIMUM 1.8190 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0005 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2770.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2770.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 4.000 AND INPUT TO OUTPUT MAXIMUM 8.000 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MAXIMUM 240.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.5590 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.960 AND ROTOR TO STATOR MAXIMUM 1.000 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 3.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 48.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1876577 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5370 AND INCHES MAXIMUM 0.6050 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 0.0 AND MAXIMUM 60.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 370.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 463.00 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1290 AND INCHES MAXIMUM 0.1350 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 105D2A2 | 95542 |
| R151M0D102 | 09017 |
| 1876577PC3 | 10001 |
| 1289320 | 10001 |