NSN 5990-00-542-3775 · NIIN 005423775 · FSC 5990
NO DASHES 5990005423775
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2495 AND INCHES MAXIMUM 2.2500 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03538-77537191 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 106 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 5.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 1.9930 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 53.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 110.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 22.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 123.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 120.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 130.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 0.800 AND INPUT TO OUTPUT MAXIMUM 1.600 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 123.00 |
| AJSL | BODY SIZE | 23 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 1.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4630 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 48 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3250 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 520.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.9010 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2470 AND INCHES MAXIMUM 0.2530 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9060 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.4100 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2470 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7190 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 20.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7753719P1 | 03538 |