NSN 5990-00-552-1369 · NIIN 005521369 · FSC 5990
NO DASHES 5990005521369
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4150 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 3.500 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.0640 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 170.00 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 2.0 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 60.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 200.00 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4790 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AAQL | BODY STYLE | |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1200 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.980 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.1120 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 517876 | 22525 |
| R150M0D102 | 51674 |
| R150 | 09017 |
| R150M0D102 | 09017 |
| IR15N4-316 | 08719 |
| VRN15-5A1 | 10651 |