NSN 5990-00-552-1611 · NIIN 005521611 · FSC 5990
NO DASHES 5990005521611
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 2250.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6160 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 10.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 9.10 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 26.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.90 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4130 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 40.0 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 27.50 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 10.30 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 185.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0630 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0900 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 145.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 31.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 66.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0630 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 10.70 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.7 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 35.00 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1233744-1 | 19315 |
| 2088193-0001 | 27914 |
| CGH-10-MS3/B213 | 4H618 |
| ZH2-A | 51761 |
| 1290299-24 | 55972 |
| AY-503-26-A1 | 55972 |
| AY503-26A1 | 83298 |
| AY-503-26-A1 | 96774 |
| 1290299-24 | 96774 |
| CGC-10-MS-3B23 | 99932 |
| CGH-10-MS3/B213 | 99932 |
| 2088193-1 | 06845 |
Supersedes
This item replaces cancelled NIIN 006127355. An older drawing citing one of those numbers resolves here.