NSN 5990-00-553-6307 · NIIN 005536307 · FSC 5990
NO DASHES 5990005536307
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 7.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 1825.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1000.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.200 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 60.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 30.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 700.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5900 AND INCHES MAXIMUM 2.6500 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.3170 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 55.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 1600.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.930 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| AJSL | BODY SIZE | 15 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.0500 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5400 AND INCHES MAXIMUM 0.6000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 2.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 8600.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 2000.00 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 976053-14 | 82577 |
| CZC15JS05 | 99932 |
| IR15N16-335 | 08719 |
| R150-105B | 09017 |