NSN 5990-00-557-7661 · NIIN 005577661 · FSC 5990
NO DASHES 5990005577661
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7910 |
| CQTM | TERMINAL LOCATION | REAR |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5580 AND INCHES MAXIMUM 2.6050 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1870 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.985 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5710 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 30.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 10.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 200.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 295.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 295.00 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 1.000 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89264-C6010291 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010713099. An older drawing citing one of those numbers resolves here.