NSN 5990-00-557-8389 · NIIN 005578389 · FSC 5990
NO DASHES 5990005578389
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 2.3000 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT NOMINAL 90.000 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 35.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 2.0910 AND INCHES MAXIMUM 2.0920 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.3750 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.9340 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 315.00 AND MAXIMUM 385.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0100 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.428 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.4900 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.1880 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 2.4960 AND INCHES MAXIMUM 2.4980 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1250 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2343 AND INCHES MAXIMUM 0.2347 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7400 AND INCHES MAXIMUM 0.7500 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 25 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 35.0 AND MILLIAMPERES MAXIMUM 430.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 5.00 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003379344. An older drawing citing one of those numbers resolves here.