NSN 5990-00-565-6118 · NIIN 005656118 · FSC 5990
NO DASHES 5990005656118
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 10.000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 120.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 720.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 50.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 20.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 210.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 36.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0430 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6150 |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 685-453-9001 | 70210 |
| A207029-1-1-8 | 82686 |
| CM41014070 | 88818 |
| 008-213-10 | 99743 |
| CGH8F7 | 99932 |
| CGH-8-BA-1 | 99932 |
| 08CX4A5U5 | 99479 |
| CM41014070 | 05088 |
Supersedes
This item replaces cancelled NIIN 008663374. An older drawing citing one of those numbers resolves here.