NSN 5990-00-573-3325 · NIIN 005733325 · FSC 5990
NO DASHES 5990005733325
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Application: 5865-00-179-3926 AND 5895-00-775-3200
Technical characteristics
57 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 395.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 81.30 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 2210.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 82.30 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1130.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 171.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 356.00 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 113.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 800.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 295.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7990 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2190.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 112.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 172.00 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.783 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.7810 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 25.80 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 159.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 137.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 59.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| FEAT | SPECIAL FEATURES | SPUR GEAR ON SHAFT;SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 5 |
| AJSL | BODY SIZE | 11 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 335.00 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AGAV | END ITEM IDENTIFICATION | 5865-00-179-3926 AND 5895-00-775-3200 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 15.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7RS910-1A | 88818 |
| 8230315-009 | 04660 |