NSN 5990-00-578-3215 · NIIN 005783215 · FSC 5990
NO DASHES 5990005783215
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 1.100 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1600 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 13.0 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES NOMINAL 1.9 |
| AJSL | BODY SIZE | 37 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 3.3340 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.6250 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 3.3750 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5160 |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 1.8120 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6550 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJWW | AFT OF SECOND FLANGE DIAMETER | INCHES NOMINAL 3.3340 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.2850 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.2050 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.6230 AND INCHES MAXIMUM 3.6250 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.3390 |
| CQTM | TERMINAL LOCATION | REAR |
| AKAN | SHAFT THREAD CLASS | 2A |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TDX37-6N1 | 64846 |
| MIL-S-20708-76A37TDX6A | 81349 |
| TDX37-6N1 | 10112 |