NSN 5990-00-578-7353 · NIIN 005787353 · FSC 5990
NO DASHES 5990005787353
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1200 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.0930 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 36.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 1.13 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 6.000 AND INPUT TO OUTPUT MAXIMUM 8.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7180 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, UNDERCUT |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.123 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 240.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 78.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 4.80 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 60.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 110.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11R578-7353 | 2X130 |
| 11RX0545L | 51761 |
| B2542000410-0 | 89944 |
| 11RC600A1 | 06989 |
Supersedes
This item replaces cancelled NIIN 005012659. An older drawing citing one of those numbers resolves here.