NSN 5990-00-583-3701 · NIIN 005833701 · FSC 5990
NO DASHES 5990005833701
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJSL | BODY SIZE | 11 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 60.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 78.50 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 28.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.50 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 81.30 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 15.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 17.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7960 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 90.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 300.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 359.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.700 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1700 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3740 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 005560742 · 005839596 · 008432454. An older drawing citing one of those numbers resolves here.