NSN 5990-00-583-9735 · NIIN 005839735 · FSC 5990
NO DASHES 5990005839735
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 3.50 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS NOMINAL 5400.00 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3550 AND INCHES MAXIMUM 0.3950 |
| AJSL | BODY SIZE | 8 |
| CQTM | TERMINAL LOCATION | REAR |
| AAQL | BODY STYLE | |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 15.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 37.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 11.80 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 105.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | MILLIMETER-MILLIGRAMS NOMINAL 2700.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0480 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.5960 AND INCHES MAXIMUM 1.6360 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 260.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 630.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 54.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 66-315 | 56232 |
| CRH8A1L-901 | 99932 |