NSN 5990-00-583-9920 · NIIN 005839920 · FSC 5990
NO DASHES 5990005839920
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1845 AND INCHES MAXIMUM 0.1850 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5600 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| AJSL | BODY SIZE | 22 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0600 |
| AAQL | BODY STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.1000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES NOMINAL 1.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.1720 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.1600 AND INCHES MAXIMUM 2.1610 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.1250 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.0000 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 2.6120 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 4.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -1.0 TO 1.0 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9990 AND INCHES MAXIMUM 1.9995 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 008119975. An older drawing citing one of those numbers resolves here.