NSN 5990-00-617-0535 · NIIN 006170535 · FSC 5990
NO DASHES 5990006170535
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.4910 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 50.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 90.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 440.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 54.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 13.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 80.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 33.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 11.60 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 26.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 285.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 5400.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 2700.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 1800.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |