NSN 5990-00-644-0102 · NIIN 006440102 · FSC 5990
NO DASHES 5990006440102
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1006.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MINIMUM 0.1680 AND INCHES MAXIMUM 0.1700 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.5440 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 757.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 127.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0360 AND INCHES MAXIMUM 0.0460 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 471.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 330.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 211.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 112.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 2.2 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| AJSL | BODY SIZE | 23 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 94 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AAQL | BODY STYLE | |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4450 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.2460 AND INCHES MAXIMUM 0.2520 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2395 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-S-20708/94 | 81349 |
| 8212786 | 81349 |
| 23CDX6A | 81349 |
| SAE-AS20708/94 | 0U583 |
| 8212786 | 0U583 |