NSN 5990-00-644-0120 · NIIN 006440120 · FSC 5990
NO DASHES 5990006440120
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| MATT | MATERIAL | BODY ALUMINUM |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| AKAN | SHAFT THREAD CLASS | 3A |
| CQTM | TERMINAL LOCATION | REAR |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9890 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 3.4350 AND INCHES MAXIMUM 3.4450 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0460 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 6.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 240.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.2430 AND INCHES MAXIMUM 4.2940 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-16892 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY240AA 2 A1 | 55972 |
| SM-D-209752-5 | 80063 |
| 23CT4 | 81349 |
| MIL-S-20708/94 | 81349 |
| 7674821 | 81349 |
| 23CT4 | 95542 |
| C767482100 | 95542 |
| SAE-AS20708/94 | 0U583 |
| 7674821 | 0U583 |
| VCT23/36/-4A | 10112 |
| CT23-4X2 | 10112 |
| 7674821 | 19204 |
Supersedes
This item replaces cancelled NIINs 005014996 · 008473916 · 009614727. An older drawing citing one of those numbers resolves here.