NSN 5990-00-644-0123 · NIIN 006440123 · FSC 5990
NO DASHES 5990006440123
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
48 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 80.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 1495.00 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.2430 AND INCHES MAXIMUM 4.2940 |
| AKAN | SHAFT THREAD CLASS | 2A |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0015 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 7.7 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 94 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 741.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9890 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 675.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0030 |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.0460 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES MAXIMUM 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.250 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 11870.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 3.4350 AND INCHES MAXIMUM 3.4450 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| ABRY | LENGTH | SHOULDER INCHES MAXIMUM 0.2500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2660 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8212775 | 81349 |
| 23CT4A | 81349 |
| MIL-S-20708/94 | 81349 |
| MS51082-4 | 96906 |
| 8212775 | 0U583 |
| SAE-AS20708/94 | 0U583 |