NSN 5990-00-652-5452 · NIIN 006525452 · FSC 5990
NO DASHES 5990006525452
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 28.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 2.00 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 50.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 640.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 87.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1224.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 235.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 3.000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3170 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6170 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 76.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 47.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 565.00 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 0.1 |
| AAQL | BODY STYLE | |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 20.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 10.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8510 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1850 AND INCHES MAXIMUM 0.1870 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 0.2 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 135.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 3.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5080 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5R933-004 | 88818 |