NSN 5990-00-655-2705 · NIIN 006552705 · FSC 5990
NO DASHES 5990006552705
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.6320 AND INCHES MAXIMUM 2.6380 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 AND INCHES MAXIMUM 0.0830 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1299 AND INCHES MAXIMUM 0.1350 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1873 |
| AAQL | BODY STYLE | |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJSL | BODY SIZE | 15 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 300.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.3090 AND INCHES MAXIMUM 1.3150 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9540 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 23.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5680 AND INCHES MAXIMUM 0.5740 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 1.0970 AND INCHES MAXIMUM 1.1030 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 1000.0 |