NSN 5990-00-655-2785 · NIIN 006552785 · FSC 5990
NO DASHES 5990006552785
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0700 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 124.70 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.484 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNIFIED NATIONAL COARSE (UNC) |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7090 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.8640 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4000 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 550.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 180.00 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.1872 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 7 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 78.10 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 150.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 159.50 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSL | BODY SIZE | 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11-4116-01 | 58880 |
| RS930-31B | 88818 |