NSN 5990-00-670-9660 · NIIN 006709660 · FSC 5990
NO DASHES 5990006709660
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 12.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 54.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 12.30 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 260.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4610 AND INCHES MAXIMUM 0.4850 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 15.30 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 113.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 540.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 45.00 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 20.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 80.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST880-2 | 88818 |
| 417503-1 | 89305 |
| 417503-1 | 88818 |
| 8TX-300A-A126/10X | 06989 |