NSN 5990-00-677-6491 · NIIN 006776491 · FSC 5990
NO DASHES 5990006776491
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 7.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 866.0 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.9950 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7190 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.240 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 84 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 25.0 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 90.00 AND MAXIMUM 112.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 85.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 11.00 AND MAXIMUM 15.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 47.00 AND MAXIMUM 53.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.8300 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.5490 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.160 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY2431E7B2 | 55972 |
| 23TDX4B | 81349 |
| MILS20708-48 | 81349 |
| AY2431E7B2 | 96774 |
| SAE-AS20708/48 | 0U583 |
| 229-0267-00 | 13499 |
Supersedes
This item replaces cancelled NIIN 008419072. An older drawing citing one of those numbers resolves here.