NSN 5990-00-677-6495 · NIIN 006776495 · FSC 5990
NO DASHES 5990006776495
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
48 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 82.0 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 10.00 AND MAXIMUM 15.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.6 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1450.00 AND MAXIMUM 1700.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 155.00 AND MAXIMUM 310.00 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSL | BODY SIZE | 22 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.2910 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 1419.00 AND MAXIMUM 1690.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 1419.00 AND MAXIMUM 1690.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | MINIMUM 26.90 AND MAXIMUM 80.15 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.4370 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 79.00 AND MAXIMUM 83.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6760 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5950 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2560 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0530 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.6230 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 23CX6C |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 23CX6C | 81349 |
| MILS20708-52 | 81349 |
| 4186800-016 | 82577 |
| 4186800-016 | 05869 |