NSN 5990-00-678-6006 · NIIN 006786006 · FSC 5990
NO DASHES 5990006786006
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.80 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -25.0 TO 25.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 10000.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3000.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| FEAT | SPECIAL FEATURES | SHAFT END TAP NO. 1-72 NF-3B,0.1720 IN. NOM DEEP |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6950 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1480 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 120.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 14.90 AND MAXIMUM 18.10 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 4.30 AND MAXIMUM 5.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6870 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0730 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSL | BODY SIZE | 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 25.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1002 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 205.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1550 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0600 AND INCHES MAXIMUM 1.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.6 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4680 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006712953. An older drawing citing one of those numbers resolves here.