NSN 5990-00-682-9897 · NIIN 006829897 · FSC 5990
NO DASHES 5990006829897
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | REAR |
| CQRG | BODY MATERIAL | ALUMINUM ALLOY |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 16.60 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.30 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 32.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.50 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 47.00 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.5000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0200 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 145.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7000 |
| AJSL | BODY SIZE | 10 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6160 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 180.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 31.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 660.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 16.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1819904 | 10001 |
| 739-900-004 | 15090 |