NSN 5990-00-686-4899 · NIIN 006864899 · FSC 5990
NO DASHES 5990006864899
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | AMPERES NOMINAL 1.3 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4500 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.70 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| CQRG | BODY MATERIAL | ALUMINUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2810 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| CQTM | TERMINAL LOCATION | REAR |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 33.8 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 27.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.20 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 17.00 |
| AJSL | BODY SIZE | 10 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 47.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 16.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 174.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 30.50 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 16.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7270 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CL40912003 | 88818 |
| 327-664 | 90073 |
| 229-0134-00 | 99932 |
| CGH10AS4A412 | 99932 |
| 10-4073-19 | 99932 |
| 4073-34-02 | 99932 |
| 10TX300B1 | 06989 |
| 10TX-304-B-1 | 06989 |
| 229-0134-00 | 13499 |
Supersedes
This item replaces cancelled NIINs 004367759 · 009056018. An older drawing citing one of those numbers resolves here.