NSN 5990-00-686-4902 · NIIN 006864902 · FSC 5990
NO DASHES 5990006864902
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS MINIMUM 2100.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 46.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1230 AND INCHES MAXIMUM 0.1240 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 110.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 21.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6400 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 0.3 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1730 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 270.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.2020 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| AJVM | SPLINE TOOTH QUANTITY | 13 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.125 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 8.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 3.800 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 20.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 50.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 10.00 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 42.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 430.0 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TRH-11-JS-2 | 4H618 |
| TRH11JS2 | 83267 |
| R925-21N | 88818 |
| TRH-11-JS-2 | 99932 |
| TRC11JS2 | 99932 |
| R925-21N | 05088 |
| 229-0176-00 | 13499 |
Supersedes
This item replaces cancelled NIINs 006469806 · 008216259. An older drawing citing one of those numbers resolves here.