NSN 5990-00-688-4759 · NIIN 006884759 · FSC 5990
NO DASHES 5990006884759
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 590.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 365.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 64.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 73.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 470.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 81.00 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 30.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6160 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1770.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 330.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 190.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CTC8A4 | 99932 |
| CTH8A4 | 99932 |
| 151-10801-002 | F6151 |
| 151-10801-002 | FAQ15 |
| 151-10801-002 | F6158 |
| CM01004907 | 05088 |
| 910083-4 | 13973 |
Supersedes
This item replaces cancelled NIINs 001235836 · 009051549. An older drawing citing one of those numbers resolves here.