NSN 5990-00-717-5116 · NIIN 007175116 · FSC 5990
NO DASHES 5990007175116
In Stock
RESOLVER,ELECTRICAL,LINEAR
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.1930 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 1.0620 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 16300.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MAXIMUM 0.0320 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 127.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.685 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.800 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0810 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 7.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 101.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 2060.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 68.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 820.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 62.00 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVP | MAXIMUM LINEAR RANGE IN DEG | -50.0 TO 50.0 |
| AJVQ | LINEARITY IN PERCENT | 0.50 |
| AJVR | OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS | 0.332 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0008 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1047255 | 77068 |
| CV21-010148-1 | 80378 |
| LTH-11-H-3 | 99932 |
| LTH-11-H-3/A420 | 99932 |
Supersedes
This item replaces cancelled NIIN 005730433. An older drawing citing one of those numbers resolves here.