NSN 5990-00-725-7804 · NIIN 007257804 · FSC 5990
NO DASHES 5990007257804
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 215.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 310.00 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 7.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 35.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 3190.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1870 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.960 AND ROTOR TO STATOR MAXIMUM 1.000 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 12 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5710 |
| AJSL | BODY SIZE | 15 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.6030 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT MINIMUM 4.600 AND OUTPUT TO INPUT MAXIMUM 6.600 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 0.67 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8600 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 82.10 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.20 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VRC15-4AA2 | 10112 |
| 10033255 | 18876 |