NSN 5990-00-727-0717 · NIIN 007270717 · FSC 5990
NO DASHES 5990007270717
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 11 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 5.500 AND INPUT TO OUTPUT MAXIMUM 11.500 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.70 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 289.00 AND MAXIMUM 391.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 363.80 AND MAXIMUM 472.20 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 263.50 AND MAXIMUM 356.50 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 29.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1717.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 1725.50 AND MAXIMUM 2304.50 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 412.25 AND MAXIMUM 557.75 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1247 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3660 AND INCHES MAXIMUM 0.3900 |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | MINIMUM 318.75 AND MAXIMUM 431.25 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3360 AND INCHES MAXIMUM 2.3600 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.9700 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 179669-002 | 81413 |