NSN 5990-00-728-8248 · NIIN 007288248 · FSC 5990
NO DASHES 5990007288248
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 29.60 AND MAXIMUM 44.40 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 9.60 AND MAXIMUM 14.40 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 6.800 AND INPUT TO OUTPUT MAXIMUM 10.200 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 1980.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 221.00 AND MAXIMUM 299.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.5980 AND INCHES MAXIMUM 1.6280 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0894 AND INCHES MAXIMUM 0.0900 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 9.60 AND MAXIMUM 14.40 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 72.00 AND MAXIMUM 108.00 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 380.0 AND MAXIMUM 420.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 120.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 700.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.436 AND ROTOR TO STATOR MAXIMUM 0.472 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 43.20 AND MAXIMUM 64.80 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 38.25 AND MAXIMUM 51.75 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 12.00 AND MAXIMUM 18.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3570 AND INCHES MAXIMUM 0.3870 |
| AJSL | BODY SIZE | 8 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CRH8A1L360 | 99932 |
| 6013-308 | 09966 |